Release notes
This topic describes new functionality, improvements and bug fixes.
Interact Pro 2.7.0
7 March 2025
What’s new
Version 2.7 includes new, updated and comprehensive documentation for the entire system, with significant enhancements and corrections made to the following documents:
-
System guide
-
Commissioning guide
-
Cloud connectivity guide
-
User guide
We have also streamlined and refined the content by removing or improving sections that were not relevant, aiming to enhance the overall quality and simplicity of our technical documentation.
2.6.6
24 February 2025
Features
-
Mains powered sensor release. MPS3100 Mains Powered Sensor for EU, METAP and APAC region is now supported.
-
Firmware Updates via mobile app (Bluetooth).
| Firmware updates via the mobile app (Bluetooth) are optional. Currently, updating the firmware of each light takes approximately 10 minutes. We are actively working to improve the firmware update speed. |
-
Motion Sensor enable/disable Option. Allows deactivation of motion sensors (SNS/SNH210, MPS3100 and SC200).
-
Occupancy sensing sensitivity adjustment. Enables adjusting individual motion sensor sensitivity (MPS3100 and SC200 sensors only).
-
Zone Master. Supports assigning a master sensor (SNS/SNH210, MPS3100 and SC200) to manage daylight dimming for all devices within a zone.
-
Daylight sensing enable/disable. When enabled, the sensor daylight regulates within a zone based on its detected light level and can optionally be chosen as the zone master. When disabled, the sensor follows the zone master in the zone for daylight regulation.
App Enhancements and Bug Fixes
General performance improvements and issue resolutions.
| with this new release Interact Pro app’s support for Android Version 8,9,10 & 11, and iOS Version 12,13,14 & 15 are discontinued. Interact Pro App will be supported only on devices with Android 12, iOS 16 and above. |
Supported versions
| Component | Version |
|---|---|
Software |
|
Interact Pro App(Android) |
4.11.12 New |
Interact Pro App(iOS) |
4.11.11 New |
Devices |
|
Gateway (LCN1840) |
7.8.2 |
Built-in sensor (SC200) |
7.4.10 New |
Built-in transceiver (SC100) |
7.4.10 New |
ADR Gateway (LCN1870) |
2.0.4 |
Built-in parking sensor (LCN4120/LCN4150) |
7.4.10 New |
Smart T-LED Gen1 |
4.11.0 |
Smart T-LED Gen2 |
7.4.10 New |
Built-in transceiver (SNS441 IA) |
7.4.10 New |
Wireless Driver Gen1 |
7.4.10 New |
Built-in sensor (SNS210 IA) |
7.4.10 New |
Built-in high bay sensor (SNH210 IA) |
7.4.10 New |
Mini Driver Gen 2 |
7.4.10 New |
Linear Driver Gen 2 |
7.4.10 New |
Switch relay Gen 1 (RFSR10) |
7.4.10 New |
Switch relay Gen 2 (RFSR20) |
7.4.10 New |
2.6.5
20 January 2025
Features
-
Choose the Zigbee channel when creating a network in the web portal.
-
Include a confirmation message before initiating a firmware upgrade to prevent unintended triggers.
Improvements
-
Auto Sync & network unlock function improvements.
-
Our project update now includes support for an intermediate version step that is necessary for devices with versions lower than 6.7.19 to reach the latest firmware version available. This means that these devices will first be updated to version 6.7.19 before moving on to the latest firmware version.
-
Lights in safe mode appear in blue text when using the app to scan near-by devices.
Bug fixes
-
Copy-paste functionality not working properly
-
Gateway failing to trigger schedules
-
Group name Cursor issue on Android devices
-
Security fixes
Supported versions
| Component | Version |
|---|---|
Software |
|
Interact Pro App(Android) |
4.9.10 New |
Interact Pro App(iOS) |
4.9.10 New |
Devices |
|
Gateway (LCN1840) |
7.8.2 New |
Built-in sensor (SC200) |
7.3.16 New |
Built-in transceiver (SC100) |
7.3.16 New |
ADR Gateway (LCN1870) |
2.0.4 |
Built-in parking sensor (LCN4120/LCN4150) |
7.3.16 New |
Smart T-LED Gen1 |
4.11.0 |
Smart T-LED Gen2 |
7.3.16 New |
Built-in transceiver (SNS441 IA) |
7.3.16 New |
Wireless Driver Gen1 |
7.3.16 New |
Built-in sensor (SNS210 IA) |
7.3.16 New |
Built-in high bay sensor (SNH210 IA) |
7.3.16 New |
Mini Driver Gen 2 |
7.3.16 New |
Linear Driver Gen 2 |
7.3.16 New |
Switch relay Gen 1 (RFSR10) |
7.3.16 New |
Switch relay Gen 2 (RFSR20) |
7.3.16 New |
2.6.4
11 November 2024
Features
-
The maximum number of projects an expert account can access has been increased from 100 to 500.
-
When creating a new Zigbee network, the Zigbee channel can now be selected (only on the mobile app). This will help to prevent interference with other Zigbee networks.
Improvements
-
Improved scalability and response time when loading multiple networks on the app.
-
Improved UI to indicate when a network can be controlled remotely or only locally with BLE.
-
In case a network is in use by another account and not synced to the cloud yet, the name of the user will be now displayed when trying to access the network.
-
Multiple security fixes and improvements.
Bug fixes
-
Fixed an issue that resulted in an empty list after scanning the lights and required a retry to be populated.
-
Fixed an issue that allowed access to light control during a firmware update.
-
Fixed an issue that prevented an export project report when using special characters on the project name.
-
Fixed an issue that prevented Bulbi to be shown if using the app in China.
-
Fixed an issue that prevented images to be properly saved in the project details page.
Supported versions
| Component | Version |
|---|---|
Software |
|
Interact Pro App(Android) |
4.8.13 New |
Interact Pro App(iOS) |
4.8.13 New |
Devices |
|
Gateway (LCN1840) |
7.8.1 New |
Built-in sensor (SC200) |
7.3.14 |
Built-in transceiver (SC100) |
7.3.14 |
ADR Gateway (LCN1870) |
2.0.4 |
Built-in parking sensor (LCN4120/LCN4150) |
7.2.15 |
Smart T-LED Gen1 |
4.11.0 |
Smart T-LED Gen2 |
7.2.15 |
Built-in transceiver (SNS441 IA) |
7.2.15 |
Wireless Driver Gen1 |
7.2.15 |
Built-in sensor (SNS210 IA) |
7.2.15 |
Built-in high bay sensor (SNH210 IA) |
7.2.15 |
Mini Driver Gen 2 |
7.2.15 |
Linear Driver Gen 2 |
7.2.15 |
Switch relay Gen 1 (RFSR10) |
7.2.15 |
Switch relay Gen 2 (RFSR20) |
7.2.15 |
2.6.2
_9 September 2024
What’s new
Features
-
Generative AI-enabled chatbot Bulbi is launched. Bulbi can support project-specific queries like 'How many lights in my network or group?' or 'How many lights can I add?' from users.
-
Release of new sensor SC200 as replacement of the SNS210
-
Release of new transceiver SC100 as replacement of the SNS441 IA
Supported versions
| Component | Version |
|---|---|
Software |
|
Interact Pro App(Android) |
4.8.9 New |
Interact Pro App(iOS) |
4.8.10 New |
Devices |
|
Gateway (LCN1840) |
7.8.0 |
ADR Gateway (LCN1870) |
2.0.4 |
Built-in parking sensor (LCN4120/LCN4150) |
7.2.15 |
Smart T-LED Gen1 |
4.11.0 |
Smart T-LED Gen2 |
7.2.15 |
Built-in transceiver (SNS441 IA) |
7.2.15 |
Wireless Driver Gen1 |
7.2.15 |
Built-in sensor (SNS210 IA) |
7.2.15 |
Built-in high bay sensor (SNH210 IA) |
7.2.15 |
Mini Driver Gen 2 |
7.2.15 |
Linear Driver Gen 2 |
7.2.15 |
Switch relay Gen 1 (RFSR10) |
7.2.15 |
Switch relay Gen 2 (RFSR20) |
7.2.15 |
Built-in sensor (SC200) |
7.3.14 |
Built-in transceiver (SC100) |
7.3.14 |
2.6.1
_3 June 2024
What’s new
Features
-
Auto sync configuration to reduce the risk of locked networks.
-
Energy savings - outdoor parking daylight override support for projects with gateway & outdoor parking sensor.
-
Minimum dim level can now be selected as dim to off (0%), dim to 5% or dim to 20% while using daylight dependent regulation.
| Firmware 7.2.15 and above is required to enable dim to off (0%). If firmware update is required, then a gateway is needed. |
Improvements
-
Light behavior graphics are updated.
-
Enhanced update reliability and security for the gateways firmware update process.
-
Updated the database engine for better performance and stability.
-
Removed the success snack bar that appeared when a user created a project, network, group, or zone.
Bug Fixes
-
Account can now be deleted if there are no networks linked to the user.
-
Fixed the redirection issue to the "Contact Us" page on the portal.
-
Resolved an issue where scene values were not applied unless the user pressed OK.
-
Resolved deployment and project setting update failures for UL Type B Smart T-LED.
-
Fixed issue where group tests did not work when daylight override was active.
-
Daylight regulation now works on zone level.
Supported versions
| Component | Version |
|---|---|
Software |
|
Interact Pro App(Android) |
4.4.8 |
Interact Pro App(iOS) |
4.4.8 |
Devices |
|
Gateway (LCN1840) |
7.6.2 |
ADR Gateway (LCN1870) |
2.0.4 |
Parking sensor |
7.2.15 |
Smart T-LED Gen1 |
4.11.0 |
Smart T-LED Gen2 |
7.2.15 |
SNS441 IA |
7.2.15 |
Wireless Driver Gen1 |
7.2.15 |
SNS210 IA |
7.2.15 |
SNH210 IA |
7.2.15 |
Mini Driver Gen 2 |
7.2.15 |
Linear Driver Gen 2 |
7.2.15 |
Switch relay Gen 1 |
7.2.15 |
Switch relay Gen 2 |
7.2.15 |
This topic describes new functionality, improvements and bug fixes.
2.6.0
_15 February 2024
What’s new
Features
Upgraded the security of the app. A password update is required.
-
All users are migrated to a new identity management service, existing users shall receive an email from no-reply@security.iotplatform.signify.com, with instructions to create an account, follow the instructions and update your First Name, Last Name, Region, Password & accept terms of use.
-
Single sign on via federation is now supported.
Note: Federation/SSO support involves additional IT configuration at both signify and customer IT Network, reach out to support for details on how to set it up.
Supported versions
| Component | Version |
|---|---|
Software |
|
Interact Pro App(Android) |
4.1.11 |
Interact Pro App(iOS) |
4.1.8 |
Devices |
|
Gateway (LCN1840) |
7.5.0 |
ADR Gateway (LCN1870) |
2.0.4 |
Parking sensor |
6.7.19 |
Smart T-LED Gen1 |
4.11.0 |
Smart T-LED Gen2 |
6.7.19 |
SNS441 IA |
6.7.19 |
Wireless Driver Gen1 |
6.7.19 |
SNS210 IA |
6.7.19 |
SNH210 IA |
6.7.19 |
Mini Driver Gen 2 |
6.7.19 |
Linear Driver Gen 2 |
6.7.19 |
Switch relay Gen 1 |
6.6.18 |
Switch relay Gen 2 |
6.7.19 |