Release notes
This topic describes new functionality, improvements and bug fixes.
Interact Pro 2.6.4
11 November 2024_
Features
-
The maximum number of projects an expert account can access has been increased from 100 to 500.
-
When creating a new Zigbee network, the Zigbee channel can now be selected (only on the mobile app). This will help to prevent interference with other Zigbee networks.
Improvements
-
Improved scalability and response time when loading multiple networks on the app.
-
Improved UI to indicate when a network can be controlled remotely or only locally with BLE.
-
In case a network is in use by another account and not synced to the cloud yet, the name of the user will be now displayed when trying to access the network.
-
Multiple security fixes and improvements.
Bug fixes
-
Fixed an issue that resulted in an empty list after scanning the lights and required a retry to be populated.
-
Fixed an issue that allowed access to light control during a firmware update.
-
Fixed an issue that prevented an export project report when using special characters on the project name.
-
Fixed an issue that prevented Bulbi to be shown if using the app in China.
-
Fixed an issue that prevented images to be properly saved in the project details page.
Supported versions
| Component | Version |
|---|---|
Software |
|
Interact Pro App(Android) |
4.8.13 New |
Interact Pro App(iOS) |
4.8.13 New |
Devices |
|
Gateway (LCN1840) |
7.8.1 New |
Built-in sensor (SC200) |
7.3.14 |
Built-in transceiver (SC100) |
7.3.14 |
ADR Gateway (LCN1870) |
2.0.4 |
Built-in parking sensor (LCN4120/LCN4150) |
7.2.15 |
Smart T-LED Gen1 |
4.11.0 |
Smart T-LED Gen2 |
7.2.15 |
Built-in transceiver (SNS441 IA) |
7.2.15 |
Wireless Driver Gen1 |
7.2.15 |
Built-in sensor (SNS210 IA) |
7.2.15 |
Built-in high bay sensor (SNH210 IA) |
7.2.15 |
Mini Driver Gen 2 |
7.2.15 |
Linear Driver Gen 2 |
7.2.15 |
Switch relay Gen 1 (RFSR10) |
7.2.15 |
Switch relay Gen 2 (RFSR20) |
7.2.15 |
Interact Pro 2.6.2
9 September 2024
What’s new
Features
-
Generative AI-enabled chatbot Bulbi is launched. Bulbi can support project-specific queries like 'How many lights in my network or group?' or 'How many lights can I add?' from users.
-
Release of new sensor SC200 as replacement of the SNS210
-
Release of new transceiver SC100 as replacement of the SNS441 IA
Supported versions
| Component | Version |
|---|---|
Software |
|
Interact Pro App(Android) |
4.8.9 New |
Interact Pro App(iOS) |
4.8.10 New |
Devices |
|
Gateway (LCN1840) |
7.8.0 |
ADR Gateway (LCN1870) |
2.0.4 |
Built-in parking sensor (LCN4120/LCN4150) |
7.2.15 |
Smart T-LED Gen1 |
4.11.0 |
Smart T-LED Gen2 |
7.2.15 |
Built-in transceiver (SNS441 IA) |
7.2.15 |
Wireless Driver Gen1 |
7.2.15 |
Built-in sensor (SNS210 IA) |
7.2.15 |
Built-in high bay sensor (SNH210 IA) |
7.2.15 |
Mini Driver Gen 2 |
7.2.15 |
Linear Driver Gen 2 |
7.2.15 |
Switch relay Gen 1 (RFSR10) |
7.2.15 |
Switch relay Gen 2 (RFSR20) |
7.2.15 |
Built-in sensor (SC200) |
7.3.14 |
Built-in transceiver (SC100) |
7.3.14 |
Interact Pro 2.6.1
3 June 2024
What’s new
Features
-
Auto sync configuration to reduce the risk of locked networks.
-
Energy savings - outdoor parking daylight override support for projects with gateway & outdoor parking sensor.
-
Minimum dim level can now be selected as dim to off (0%), dim to 5% or dim to 20% while using daylight dependent regulation.
| Firmware 7.2.15 and above is required to enable dim to off (0%). If firmware update is required, then a gateway is needed. |
Improvements
-
Light behavior graphics are updated.
-
Enhanced update reliability and security for the gateways firmware update process.
-
Updated the database engine for better performance and stability.
-
Removed the success snack bar that appeared when a user created a project, network, group, or zone.
Bug Fixes
-
Account can now be deleted if there are no networks linked to the user.
-
Fixed the redirection issue to the "Contact Us" page on the portal.
-
Resolved an issue where scene values were not applied unless the user pressed OK.
-
Resolved deployment and project setting update failures for UL Type B Smart T-LED.
-
Fixed issue where group tests did not work when daylight override was active.
-
Daylight regulation now works on zone level.
Supported versions
| Component | Version |
|---|---|
Software |
|
Interact Pro App(Android) |
4.4.8 |
Interact Pro App(iOS) |
4.4.8 |
Devices |
|
Gateway (LCN1840) |
7.6.2 |
ADR Gateway (LCN1870) |
2.0.4 |
Parking sensor |
7.2.15 |
Smart T-LED Gen1 |
4.11.0 |
Smart T-LED Gen2 |
7.2.15 |
SNS441 IA |
7.2.15 |
Wireless Driver Gen1 |
7.2.15 |
SNS210 IA |
7.2.15 |
SNH210 IA |
7.2.15 |
Mini Driver Gen 2 |
7.2.15 |
Linear Driver Gen 2 |
7.2.15 |
Switch relay Gen 1 |
7.2.15 |
Switch relay Gen 2 |
7.2.15 |
This topic describes new functionality, improvements and bug fixes.
Interact Pro 2.6
15 February 2024
What’s new
Features
Upgraded the security of the app. A password update is required.
-
All users are migrated to a new identity management service, existing users shall receive an email from no-reply@security.iotplatform.signify.com, with instructions to create an account, follow the instructions and update your First Name, Last Name, Region, Password & accept terms of use.
-
Single sign on via federation is now supported.
Note: Federation/SSO support involves additional IT configuration at both signify and customer IT Network, reach out to support for details on how to set it up.
Supported versions
| Component | Version |
|---|---|
Software |
|
Interact Pro App(Android) |
4.1.11 |
Interact Pro App(iOS) |
4.1.8 |
Devices |
|
Gateway (LCN1840) |
7.5.0 |
ADR Gateway (LCN1870) |
2.0.4 |
Parking sensor |
6.7.19 |
Smart T-LED Gen1 |
4.11.0 |
Smart T-LED Gen2 |
6.7.19 |
SNS441 IA |
6.7.19 |
Wireless Driver Gen1 |
6.7.19 |
SNS210 IA |
6.7.19 |
SNH210 IA |
6.7.19 |
Mini Driver Gen 2 |
6.7.19 |
Linear Driver Gen 2 |
6.7.19 |
Switch relay Gen 1 |
6.6.18 |
Switch relay Gen 2 |
6.7.19 |