Update lights using Mobile App
The firmware version of the luminaires and sensors can now be easily updated via the mobile app and Bluetooth connection, eliminating the need for a gateway.
| Firmware updates via the mobile app (Bluethoot) are optional. Updating devices is only needed when the latest features or bug fixes are not available with the current version. |
Updates can be carried out for either the complete group or for a single device, with each device requiring approximately 10 minutes for the update process.
| It is crucial to ensure that during the update, the phone remains within close proximity to the devices being updated, with the app open and the screen active. If the app is closed, the update process may be interrupted. Only the last device being updated will need to be restarted after an interruption. |
Update firmware for a single device
-
Go to Setup, select a network, select a group, on the Lights tab, tap on the information (i) icon next to the device to be updated.
-
Scroll down to the bottom of the screen and tap on Update firmware.
Update lights for a group
-
Go to setup, chose the desired network and group, tap on the three dots, then tap on Update lights.
-
The app starts scanning for lights in the group withing Bluetooth range (within a maximum radius of 10-15m from your phone).
-
Select the lights to be updated. If the lights show a green dot, they are within reach or a red dot if they are not. Only lights with available updates can be selected.
-
After selecting the lights within range, tap on Update, note that it takes approximately 10 minutes for completing the update of each light.
-
If the update fails, then an error message will be displayed on your screen showing which luminaires failed, make sure the devices are energized and respond to a blink before re-trying again to maximize the chance.
-
If the lights are successfully updated, a message stating up-to-date appears next to the light in your app.
