####################### INSTRUCTIONS ####################### #Remove these instructions before uploading the file to the# #device. Every line that starts with a "#" is commented and# #the device will not accept it. This means the line must be# #reviewed and edited according to configuration needs. # #Edited this configuration and remove the "#" comment sign # #before saving the new configuration file. # ############################################################ ! version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname SWIAI-ACCESS ! boot-start-marker boot-end-marker ! # enable secret PLEASE-DEFINE-YOUR-PASSWORD-HERE ! # username admin privilege 15 secret PLEASE-DEFINE-YOUR-PASSWORD-HERE no aaa new-model system mtu routing 1500 ! ! ! ! ! ! spanning-tree mode rapid-pvst spanning-tree extend system-id errdisable recovery cause bpduguard errdisable recovery cause storm-control errdisable recovery interval 600 ! alarm profile defaultPort alarm not-operating syslog not-operating notifies not-operating ! ! vlan internal allocation policy ascending ! lldp run ! ! ! ! ! ##### ACCESS INTERFACE TEMPLATE ##### # description ACCESS PORT # switchport access vlan 100 # switchport mode access # switchport nonegotiate # no cdp enable # spanning-tree portfast edge # spanning-tree bpduguard enable ! ! ##### TRUNK INTERFACE TEMPLATE ##### #description TRUNK PORT #switchport trunk allowed vlan 100 #switchport mode trunk #switchport nonegotiate ! ! ##### NOT-IN-USE INTERFACE TEMPLATE ##### # description NOT-IN-USE # switchport mode access # switchport access vlan 999 # switchport nonegotiate # no cdp enable # spanning-tree bpduguard enable # shutdown ! ! ! ! interface FastEthernet1/1 #Insert template for access or trunk #as per topology needs. ! interface FastEthernet1/2 #Insert template for access or trunk #as per topology needs. ! interface FastEthernet1/3 #Insert template for access or trunk #as per topology needs. ! interface FastEthernet1/4 #Insert template for access or trunk #as per topology needs. ! interface FastEthernet1/5 #Insert template for access or trunk #as per topology needs. ! interface FastEthernet1/6 #Insert template for access or trunk #as per topology needs. ! interface FastEthernet1/7 #Insert template for access or trunk #as per topology needs. ! interface FastEthernet1/8 #Insert template for access or trunk #as per topology needs. ! interface GigabitEthernet1/1 #Insert template for access or trunk #as per topology needs. ! interface GigabitEthernet1/2 #Insert template for access or trunk #as per topology needs. ! interface Vlan1 no ip address shutdown ! vlan 999 name not_in_use no cdp run ! no ip http server no ip http secure-server ! ! ! line con 0 logging synchronous login local line vty 0 4 login local transport input none line vty 5 15 login local transport input none ! ! banner motd = SSSSS SSSSS III III FFFFF SSSS SSSS III III FFF FF SSS SSSSS SSS GG GG GG nn nnnnn FFF SSS SSSS SSSS SSS IIIII GGGGG GGGGG nnnnnnnnnn IIIII FFFFFFFFFF YYY YYY SSS SSS SSS III GGG GGGG nnn nnn III FFF YYY YYY SSS SSSSSSS SSS III GGG GGG nnn nnn III FFF YYY YYY SSS SSS SSS III GGGG GGGG nnn nnn III FFF YYYYY SSS SSSS SSSS SSS III GGGGGGGGGGG nnn nnn III FFF YYY SSS SSSS SSS IIIIIIIIII GGG nnn nnn IIIIIIIIII FFF YY SSSSS SSSSS GGG GGG YY YY SSSSSSSSSSSSS GGGGGGGG YYYYY SSSSS GGG YYY WARNING: Signify Authorized personnel only. UNAUTHORIZED ACCESS IS PROHIBITED! = ! end